Phenolic Resin Cement Mortar

Product Details:

Anticorr Phenolic Resin Cement is widely used for Acid Resistant Bricks & Tiles lining works as Bedding & Jointing Mortar for Tanks, Floor, Drain, Foundation, Chemical Reaction Vessels, and Neutralization Pit etc. Resistant It is resistant to Concentrated H2SO4 acid, acid, Non-Oxidizing Acids, Dilute Oxidizing acids, Solvents and Neutral Salts.

Product Details:

Phenolic Resin Mortar

Phenolic Resin Mortar is widely used for acid resistant bricks tiles lining works as bedding jointing mortar.

It is resistant to concentrated H2SO4 acid, non-oxidizing acids, dilute oxidizing acids, solvents and neutral salts.

Resistant to temperature: 170 DegreeC (max.)

Batch Num: PM/20

Mfg Date: 18.01.17

Use within 45 days from mfg date

Keep in cool and dry place

Preparation of Mortar:

Preparation of mortar generally consists of solution and powder.

In order to obtain good working consistency, the average mixing ratio is 1 pbw of solution 3 pbw of powder.

This ratio will slightly vary depending upon the temperature and working conditions.

Prepare small batches of mortar.

Stir the solution thoroughly before use.

Place the solution in a suitable mixing pan and add powder in it.

Mix thoroughly with a spatula or trowel.

The mixing operation shall be continued until a uniform mixture is obtained.

Make sure that all the mortar is used from the mixing pan before another batch is prepared.

Surface preparation:

The cement plastered surface shall be slightly rough in line level, dry clean, free from dust, dirt, grease, oil etc., maintaining required slope etc.