K Silicate Mortar Cement

Product Details:

K Silicate Mortar

Potassium Silicate Mortar, K Silicate Based Mortar, Potassium Silicate Based Cement from Gujarat, India

K Silicate Mortar is widely used for Acid Resistant Bricks &Tiles lining works as Bedding & Jointing Mortar for Tanks, Floor, Drain, Foundation etc.

Resistant:

It is resistant to Oxidizing & Non-oxidizing Acids, & Chlorine Gas except Hydrofluoric Acid.

Product Details:

We are the leading manufacturer and exporter of Potassium Silicate Mortar also known as K Silicate Mortar

Other Details

• It is resistant to oxidizing and non-oxidizing acids, chlorine gas except Hydrofluoric Acid.
• Batch Num SM/115
• Mfg Date 10.06.17
• Use within 24 months from mfg date
• Keep in cool and dry place

Preparation of Mortar

• Preparation of Mortar generally consists of solution and powder.
• In order to obtain good working consistency, the average mixing ratio is 1 Pbw of solution and 3 pbw of powder.
• This ratio will slightly vary depending upon the temperature and working conditions.
• Prepare small batches of mortar.
• Stir the solution thoroughly before use.
• Place the solution in a suitable mixing pan and add powder in it.
• Mix thoroughly with a spatula or trowel.
• The mixing operation shall be continued until a uniform mixture is obtained.
• Make sure that all the mortar is used from the mixing pan before another batch is prepared.

Surface Preparation

• The cement plastered surface shall be slightly rough in line level, dry clean, free from dust, dirt, grease, oil etc., maintaining required slope etc. as no slope can be adjusted or altered in acid proof lining works.